 |
|
|
Tel:+86-577-62316858 |
| Fax:+86-577-62325879 |
|
 |
|
|
|
|
|
|
|
|
|
Force Meter, Isolation
Connect Pipe |
Function
1.Guard against theft: After
the force meter is taken apart, the measured medium(such
as oil, liquefied gas, water etc) isn't fundamentally
flow out, although the one-time valve is wholeope,
It make the damage down to the lowest.
2. Isolation: When the measured
medium is the matter that is easy to freeze, pour
the isolation liquid (such as glycerine, antifreezer)
into the connecting tube to insolate the measured medium
and force meter from freezing. At this time, the
Force Meter Damp, Isolation Connecting Pipe tube as
an isolation vat, but it has low price and excellent
function.
3. Damp: It can extend the
using life of the pressure meter because the special
structure of the tube can reduce the puncture from
violent valve of the measured pressure.
4. If the one-time valve
can't be closed, we can change the force meter with
pressure, to checkout technology the course is very
advantageous.
Using scope
1. Pressure:Between low
pressure 0.3～9.0MPa and high pressure 10.0～20.0MPa.
2. Temperature: Environmental
temperature can be -40℃～+180℃.
It has suitable scope if you choose suitable
isolation liquid.
3. Medium: It is suitable
for normal medium in oil, chemical industry, oil
field etc trade. The material of this tube is 1Cr18Ni9Ti.
You give a material demand for the special corrasion medium.
4. Isolation liquid: Choose
suitable isolation according to environmental temperature
and the features of the measured medium. If the
measured medium is water, it can be directly used
in normal temperature. In the environment of below
zero, we should choose glycerine, alcohol etc. Antifreezing
medium as isolation liquid to stop from freezing
the force meter.
Installation
This force meter
connect pipe can instead of active isolation vat
and curved pipe. But it must be vertical to the ground.
This connecting pipe is suitable
for present all kinds of elbows, the customers only
give connecting type and specification.
We can provide present measurement
and installation.
Denominate |
|
|
The
structure sketch map |
|
The
installation sketch map |
|
|
|
 |
|
|
| |
|
|
